Hydraulics, Inc.
713 W.11th St.
Vancouver, WA 98660

Phone:
1.800.500.4399
360.693.4399
503.285.0975

Fax:
360.696.2555

www.hydraulics-inc.com sales@hydraulics-inc.com
All Categories > Hydraulic & Industrial Hose & Accessories > Hydraulic Hose, Tubing & Fittings > Hydraulic Hose > Hydraulic Spiral Hose > Four Spiral Wire Hose > GH506 Four Spiral Wire Hose > Item # GH506-12  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # GH506-12, GH506 Four Spiral Wire Hose



GH506

larger image
Construction: Synthetic rubber tube, 4-spiral wire reinforcement, synthetic rubber cover.
Operating Temperature Range: -40 ºC to 100 ºC (-40 ºF to 212 ºF)
Application: Four wire hose for high pressure hydraulic systems with petroleum and water-base fluids.

Also available as an M100 length (GH506-12M100). This P/N is a minimum 100 feet in length.


Unit of Measure: Imperial | Metric | Both 

 Specifications  Product Warning  

Eaton's Aeroquip Hose and Fitting Assembly Product Warning
Flexible hose lines offer many advantages over rigid tubing including routing ease, vibration absorption, sound deafening and the ability to accommodate movement of connected components. However, hose lines require caution in use not only to provide long service, but also to guard against potentially dangerous failure.

Important
The user should carefully observe the precautions listed in this catalog, including the recommendations on the selection of hose and fittings on the relevant pages, and the pages on fluid compatibility. In addition, care should be taken not to exceed the minimum bend radius listed for each hose size and type in the hose section.

Maximum operating pressure should not exceed pressures listed in the hose data. Instructions for assembling fittings to different hose should be followed carefully to ensure the performance of the completed assembly.

Eaton fitting tolerances are engineered to match Eaton’s Aeroquip hose tolerances. The use of Eaton fittings on hose supplied by other manufacturers and/or the use of Eaton’s Aeroquip hose with fittings supplied by other manufactures may result in the production of unreliable and unsafe hose assemblies and is neither recommended nor authorized by Eaton Corporation or any of its affiliates or subsidiaries.

Application considerations must be observed in selecting appropriate components for the application of these products contained herein. The failure to follow the recommendations set forth in this catalog may result in an unstable application which may result in serious personal injury or property damage.

EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTIAL AND CONTINGENT DAMAGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THE- ORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRO-DUCED FROM GENUINE AEROQUIP HOSE FITTINGS, HOSE AND AERO- QUIP APPROVED EQUIP MENT, AND IN CONFOR MANCE WITH EATON’S AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY.

Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, serious injury or death.

Routing
If the user follows the recommendations on hose line routing and installation as provide herein, improved safety and longer service life of any hose installation will result.

Accurate processing and prompt delivery of your order depends on easy identification of your requirements. Please order Aeroquip brand parts using correct part numbers as described in this catalog. Inquiries and orders should be directed to your Aeroquip Distributor or: Eaton Corporation 14615 Lone Oak Road Eden Prairie, MN 55344 USA 952/937-9800; Fax: 952/974-7722 www.hydraulics.eaton.com

Part numbers and dash sizes
Dash size designates the nominal size in 16ths of an inch. This number immediately follows the part number and is separated from it with a dash.

Dimensions
Dimensions given in this catalog for Aeroquip products are approximate and should be used for reference only. Exact dimension al information for a given product is subject to change and varying tolerances; contact Eaton directly for full current information.

Hose assemblies
Eaton manufactures the terminal ends of our hose fittings to the appropriate requirements established by the SAE. Therefore, the performance ratings of these hose fittings meet the SAE requirements. It is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating. When ordering hose assemblies, please keep the connecting end performance rating in mind since this may affect overall hose assembly performance.

Hose assembly components (hose and fittings) are easily assembled in the field. However, factory assembled reusable and crimped hose assemblies are available. For complete information, contact Eaton.




 Global Spiral TTC Fittings 


Global Spiral TTC Fitting 45° Elbow Split Flange Code 62

45° Elbow Split Flange Code 62 Global Spiral TTC Fittings


Global Spiral TTC Fitting 90° Elbow Split Flange Code 62

90° Elbow Split Flange Code 62 Global Spiral TTC Fittings

more available ..


 Spiral TTC Crimp Fittings 


BSPP Swivel Straight

JIS/BSPP Female Swivel Global TTC Crimp Fittings


BSPP Swivel-45 Elbow

45º Elbow JIS/BSPP Female Swivel Spiral Crimp TTC Fittings

more available ..


Request Information
Hydraulics, Inc. | For All Your Fluid Conveyance Needs NAHAD FBE DMF NAHAD Listed Memberfacebook